/*
 *    Copyright 2004-2006 Intel Corporation
 * 
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 * 
 *        http://www.apache.org/licenses/LICENSE-2.0
 * 
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

#ifdef HAVE_CONFIG_H
#  include <config.h>
#endif

#include "jenkins_hash.h"

namespace oasys {

/*
 * Fast general purpose hash function from Bob Jenkins:
 * http://burtleburtle.net/bob/hash/doobs.html
 *
 * Slightly modified by mike demmer to use standard type definitions
 * and parameter types inside the declaration.
 */

#define hashsize(n) ((u_int32_t)1<<(n))
#define hashmask(n) (hashsize(n)-1)

/*
--------------------------------------------------------------------
mix -- mix 3 32-bit values reversibly.
For every delta with one or two bits set, and the deltas of all three
  high bits or all three low bits, whether the original value of a,b,c
  is almost all zero or is uniformly distributed,
* If mix() is run forward or backward, at least 32 bits in a,b,c
  have at least 1/4 probability of changing.
* If mix() is run forward, every bit of c will change between 1/3 and
  2/3 of the time.  (Well, 22/100 and 78/100 for some 2-bit deltas.)
mix() was built out of 36 single-cycle latency instructions in a 
  structure that could supported 2x parallelism, like so:
      a -= b; 
      a -= c; x = (c>>13);
      b -= c; a ^= x;
      b -= a; x = (a<<8);
      c -= a; b ^= x;
      c -= b; x = (b>>13);
      ...
  Unfortunately, superscalar Pentiums and Sparcs can't take advantage 
  of that parallelism.  They've also turned some of those single-cycle
  latency instructions into multi-cycle latency instructions.  Still,
  this is the fastest good hash I could find.  There were about 2^^68
  to choose from.  I only looked at a billion or so.
--------------------------------------------------------------------
*/
#define mix(a,b,c) \
{ \
  a -= b; a -= c; a ^= (c>>13); \
  b -= c; b -= a; b ^= (a<<8); \
  c -= a; c -= b; c ^= (b>>13); \
  a -= b; a -= c; a ^= (c>>12);  \
  b -= c; b -= a; b ^= (a<<16); \
  c -= a; c -= b; c ^= (b>>5); \
  a -= b; a -= c; a ^= (c>>3);  \
  b -= c; b -= a; b ^= (a<<10); \
  c -= a; c -= b; c ^= (b>>15); \
}

/*
--------------------------------------------------------------------
hash() -- hash a variable-length key into a 32-bit value
  k       : the key (the unaligned variable-length array of bytes)
  len     : the length of the key, counting by bytes
  initval : can be any 4-byte value
Returns a 32-bit value.  Every bit of the key affects every bit of
the return value.  Every 1-bit and 2-bit delta achieves avalanche.
About 6*len+35 instructions.

The best hash table sizes are powers of 2.  There is no need to do
mod a prime (mod is sooo slow!).  If you need less than 32 bits,
use a bitmask.  For example, if you need only 10 bits, do
  h = (h & hashmask(10));
In which case, the hash table should have hashsize(10) elements.

If you are hashing n strings (u_int8_t **)k, do it like this:
  for (i=0, h=0; i<n; ++i) h = hash( k[i], len[i], h);

By Bob Jenkins, 1996.  bob_jenkins@burtleburtle.net.  You may use this
code any way you wish, private, educational, or commercial.  It's free.

See http://burtleburtle.net/bob/hash/evahash.html
Use for hash table lookup, or anything where one collision in 2^^32 is
acceptable.  Do NOT use for cryptographic purposes.
--------------------------------------------------------------------
*/

u_int32_t
jenkins_hash(u_int8_t *k,        /* the key */
             u_int32_t length,   /* the length of the key */
             u_int32_t initval)  /* the previous hash, or an arbitrary value */
{
   register u_int32_t a,b,c,len;

   /* Set up the internal state */
   len = length;
   a = b = 0x9e3779b9;  /* the golden ratio; an arbitrary value */
   c = initval;         /* the previous hash value */

   /*---------------------------------------- handle most of the key */
   while (len >= 12)
   {
      a += (k[0] +((u_int32_t)k[1]<<8) +((u_int32_t)k[2]<<16) +((u_int32_t)k[3]<<24));
      b += (k[4] +((u_int32_t)k[5]<<8) +((u_int32_t)k[6]<<16) +((u_int32_t)k[7]<<24));
      c += (k[8] +((u_int32_t)k[9]<<8) +((u_int32_t)k[10]<<16)+((u_int32_t)k[11]<<24));
      mix(a,b,c);
      k += 12; len -= 12;
   }

   /*------------------------------------- handle the last 11 bytes */
   c += length;
   switch(len)              /* all the case statements fall through */
   {
   case 11: c+=((u_int32_t)k[10]<<24);
   case 10: c+=((u_int32_t)k[9]<<16);
   case 9 : c+=((u_int32_t)k[8]<<8);
      /* the first byte of c is reserved for the length */
   case 8 : b+=((u_int32_t)k[7]<<24);
   case 7 : b+=((u_int32_t)k[6]<<16);
   case 6 : b+=((u_int32_t)k[5]<<8);
   case 5 : b+=k[4];
   case 4 : a+=((u_int32_t)k[3]<<24);
   case 3 : a+=((u_int32_t)k[2]<<16);
   case 2 : a+=((u_int32_t)k[1]<<8);
   case 1 : a+=k[0];
     /* case 0: nothing left to add */
   }
   mix(a,b,c);
   /*-------------------------------------------- report the result */
   return c;
}

} // namespace oasys